How much does a dedicated proxy cost per IP?
Cost per IP is the recurring plan charge divided by exclusive addresses in the period, but a cheap IP that cannot reach your target is not a saving.
On Node4, a dedicated proxy starts at $7.45/month for 5 proxies ($1.49 per proxy). More generally, a dedicated proxy's cost per IP is the recurring plan charge divided by the number of exclusive IP addresses included for the same billing period. Include mandatory charges and traffic fees, then check whether those addresses actually complete your workload: an exclusive IP does not guarantee access to a target website.
TL;DR
- Compare dedicated proxy cost per IP over the same billing period, with mandatory charges included.
- Dedicated allocation controls who uses an exit address; it does not guarantee successful requests.
- Use curl to separate proxy authentication failures from target-site responses before committing a workload.
- Compare usable dedicated addresses, not gateway endpoints, rotating exits, or concurrent connections.
Start from Node4's own rate, then run the general formula
Node4's dedicated (Premium Datacenter) entry tier is $7.45/month for 5 proxies ($1.49 per proxy), and the per-proxy rate falls at higher volumes; see the full ladder on the dedicated pricing page. That is Node4's price, not a market average.
Calculate the effective per-IP charge from the current plan, not from a headline rate alone. Identify the billing period and confirm how many addresses are exclusively allocated to your account. Keep traffic allowances and mandatory charges beside that figure.
Use this breakdown when reviewing a quote:
| Component | What to record | Why it belongs in the calculation |
|---|---|---|
| Recurring plan charge | Charge for the selected billing period | Establishes the base commitment |
| Dedicated address count | Exclusive IPs included in that period | Provides the denominator |
| Mandatory charges | Required charges outside the base plan | Prevents an understated total |
| Traffic charges | Any applicable usage charges | Connects the quote to your actual workload |
| Billing duration | Exact start and end of the service period | Prevents comparisons between unequal terms |
The arithmetic is straightforward:
effective charge per dedicated IP =
total applicable charges for the period
/ dedicated IPs included for that periodKeep this separate from the cost of a usable result. The first calculation describes the contract. The second describes whether the contract works for your scraper, monitoring job, or testing workflow.
Exclusivity is not the same thing as access
A dedicated address gives you exclusive allocation under the provider’s service terms. It does not give you exclusive control over the surrounding network’s reputation, the target’s access rules, or the target’s rate limits.
That distinction changes the buying decision. If your application needs a stable source address, exclusivity addresses a real requirement. If your application needs a different country or an address type the target accepts, exclusivity alone does not solve the problem.
Write the operational requirement before comparing plans. Specify the destination, required location, session behavior, and expected traffic. Otherwise, the arithmetic can be correct while the purchase is wrong.
Dedicated, shared, and rotating access use different denominators
An endpoint, an exit address, and a concurrent connection are not interchangeable units. A gateway can route requests through changing exits. Multiple simultaneous requests can also use the same exit address.
Compare these options by allocation behavior before comparing the bill:
| Access model | Best for | Main advantage | Main limitation |
|---|---|---|---|
| Dedicated IP allocation | Workloads requiring exclusive exit use | Separates your use from other customers using that exact exit | Does not guarantee target acceptance |
| Shared IP allocation | Workloads that tolerate shared exit reputation | Exclusivity is not required | Other users can affect the exit’s reputation |
| Rotating access | Workloads that require exit changes | Supports changing source addresses | Rotation does not establish exclusive ownership of each exit |
Do not divide a rotating service’s subscription by an advertised pool size and label the result a dedicated per-IP rate. Access to an address pool is not an allocation of every address in it. Likewise, a connection allowance describes simultaneous activity, not the number of addresses reserved for you.
If the decision is about isolation rather than rotation, read the guide to whether a dedicated proxy is worth paying extra over a shared IP. Choose the allocation model that matches your requirement before comparing its billing terms.
Can a dedicated proxy still be rejected by a website?
Yes. A dedicated proxy can still receive a target’s rate-limit response or access challenge. Exclusivity describes allocation, not permission to access a website.
Treat successful application responses as a separate acceptance criterion. Confirm that your intended use complies with the destination’s rules, and do not treat a paid address as authorization to bypass them.
Why your effective dedicated proxy cost varies
The useful comparison is not just the nominal charge. It is the amount you commit for addresses that meet your application’s requirements.
- Assigned quantity. Divide by addresses actually included in your allocation, not by an entire network’s advertised capacity. Keep purchased addresses and usable addresses as separate counts.
- Billing period. Compare matching service periods. An upfront commitment and a recurring monthly charge describe different cash commitments even when both are expressed as a monthly equivalent.
- Traffic terms. Record whether traffic is included, metered, or subject to usage conditions. Do not assume dedicated allocation means unlimited transfer.
- Location requirements. An address outside your required country does not satisfy a country-specific job. Verify the location against the destination’s behavior, not just a dashboard label.
- Connection requirements. IP count does not establish the permitted simultaneous connection count. Confirm that your worker configuration fits the plan’s connection rules.
- Target acceptance. An address that connects successfully to the proxy gateway can still fail at the destination. Track usable results separately from successful proxy authentication.
These factors belong in your comparison worksheet because they describe different failure modes. Buying more addresses does not correct an authentication error. Increasing concurrency does not correct a location mismatch.
Check what “dedicated” means before ordering
Ask whether the exit address is exclusive to your account for the service period. Also ask whether the assignment is persistent and what happens when an address stops meeting your requirements.
Do not assume that dedicated, static, residential, and datacenter describe the same property. Dedicated describes allocation. Static describes persistence. Residential and datacenter describe different network categories.
Get the following points in writing:
- Whether another customer can use the same exit during your allocation.
- Whether reconnecting preserves the assigned exit.
- Which locations apply to the specific product you are buying.
- Which authentication methods your application must support.
- Which traffic, connection, and usage conditions apply.
- What the replacement process requires.
These are contract checks, not assumed features. Keep the answers with the quote so your developers and purchasing team evaluate the same service.
Is a static proxy always dedicated?
No. A static exit can remain unchanged without being exclusive to your account. Confirm persistence and exclusivity separately rather than treating either label as proof of the other.
Match location coverage to the actual product
Node4 datacenter proxies are best for teams whose required locations are the United States, Italy, or Spain. Its datacenter infrastructure runs on owned IP blocks in those three countries. That geographic scope is a useful fit criterion and a clear limitation for jobs requiring other countries.
Do not transfer a provider-wide coverage claim to every product in its catalog. Country coverage belongs to the specific service being purchased. A dedicated allocation in the wrong location is still the wrong allocation.
Put the required country directly beside each proposed allocation. If your destination applies its own geolocation database, test the destination’s interpretation before accepting the deployment.
Test the allocation before scaling the workload
Run the same authorized request through each assigned proxy. Keep the destination, request headers, and application behavior consistent so the comparison measures the proxy path rather than unrelated changes in your client.
This curl command takes its configuration from environment variables. Set them to your supplied endpoint, credentials, and an HTTPS destination you own or are authorized to test. The command contains no provider-specific endpoint assumptions.
: "${PROXY_URL:?Set the supplied proxy URL}"
: "${PROXY_USER:?Set the proxy username}"
: "${PROXY_PASSWORD:?Set the proxy password}"
: "${TARGET_URL:?Set an authorized HTTPS target URL}"
curl -q --noproxy '' \
--silent \
--show-error \
--proxy "$PROXY_URL" \
--proxy-user "$PROXY_USER:$PROXY_PASSWORD" \
--connect-timeout 10 \
--max-time 30 \
--output /dev/null \
--write-out 'http_status=%{http_code}\ntotal_seconds=%{time_total}\n' \
"$TARGET_URL"Use the proxy scheme and authentication method specified for your endpoint. This example uses username-and-password authentication; it is not a claim that every plan requires that method. Do not paste production credentials into tickets or shared logs.
Read the result at the correct layer:
- HTTP status 407 means proxy authentication is required. Check credentials and the configured authentication method before evaluating target access.
- HTTP status 429 means the responding server is applying rate limiting. Respect the response and review your request schedule.
- HTTP status 200 indicates a successful HTTP response, but it does not prove the body contains the data your application needs.
Inspect the response body in a separate authorized test. A challenge page, login page, or unexpected document can still be unsuitable for your job. Record the application result, not just the status code.
Measure usable output, not just assigned addresses
Keep two calculations in your purchasing worksheet. One describes the allocation; the other describes production output.
allocation metric =
total applicable charges
/ assigned dedicated IPs
workload metric =
total applicable charges
/ usable application resultsUse the same reporting period for both. Define a usable result before running the job: for example, the expected document type with the fields your pipeline requires. Exclude challenge pages and malformed responses from that result count.
Track retries separately. A retry consumes application work and can consume traffic even when it produces no usable result. Avoid reporting all completed requests as successful collection.
For agencies, separate client workloads in your records. A combined account total hides which destination, geography, or session requirement creates the extra work. You do not need separate purchasing contracts to maintain separate operational measurements.
Calculate from your own billing data
This Python example performs the division without embedding a rate that will become stale. It reads the total applicable charge and dedicated address count from environment variables, then reports the result in the same currency unit as the input.
import os
from decimal import Decimal
charge = Decimal(os.environ["PERIOD_TOTAL_CHARGE"])
address_count = int(os.environ["DEDICATED_IP_COUNT"])
if not charge.is_finite() or charge < 0:
raise ValueError("The period charge must be finite and nonnegative")
if address_count <= 0:
raise ValueError("The dedicated IP count must be positive")
per_ip = charge / Decimal(address_count)
print(f"Charge per dedicated IP for this period: {per_ip}")Use an invoice total or a quote total with the relevant mandatory charges included. Do not mix currencies or divide an annual charge by a monthly allocation without first matching their periods.
The script calculates a billing ratio, not service quality. Keep its output beside your acceptance-test results rather than using it as the entire buying decision.
FAQ
How do I calculate dedicated proxy cost per IP?
Divide the total applicable charge for a billing period by the number of dedicated IP addresses included for that same period. Include mandatory charges and applicable traffic charges rather than using the base plan charge alone.
Is a dedicated proxy always better than a shared proxy?
A dedicated proxy is better when exclusive use of the exit address is a requirement. Shared access remains an option when your workload tolerates shared exit reputation; target acceptance is not guaranteed by either allocation model.
Does one proxy endpoint mean one dedicated IP?
One proxy endpoint does not establish that you have one dedicated IP. A gateway can route requests through changing exits, so confirm the exclusive address allocation in the service terms.
Does a dedicated proxy include unlimited bandwidth?
Dedicated allocation does not establish the bandwidth allowance. Check the specific plan’s traffic terms, connection rules, and usage conditions before sizing your workload.
Can a dedicated proxy still get rate limited?
A dedicated proxy can still get rate limited. HTTP status 429 indicates rate limiting by the responding server, so review the response and respect the destination’s request limits.
Should I compare dedicated proxies by successful requests?
Compare dedicated proxies by usable application results as well as the charge per assigned IP. A successful connection or HTTP response does not establish that the returned content meets your pipeline’s requirements.
Your denominator is part of the buying decision
Assigned IPs measure allocation. Accepted addresses measure deployment fit. Usable results measure the output your team actually needs.
Keep all three in your worksheet. A quote becomes easier to evaluate when you stop asking a single per-IP figure to describe exclusivity, target acceptance, and production output at once.