Node4 vs IPRoyal: Prices, Limits and Locations Compared
IPRoyal covers more countries and a wider session window; Node4 costs less on owned datacenter IPs and mid-size residential. Matched costs inside.
Pick IPRoyal for datacenter exits outside the United States, Italy or Spain, a residential session held for days rather than minutes, or a small residential test under 3 GB. Pick Node4 for owned datacenter IPs in those three countries at a lower per-proxy rate, or for residential traffic once a job passes about 10 GB a month.
Both companies sell several products that do not line up one for one, so this page compares each Node4 plan with the IPRoyal product that does the same job. Node4's datacenter, shared and rotating datacenter plans run on IP blocks it owns in the United States, Italy and Spain; its residential plans use a partner network. Every IPRoyal fact links to the IPRoyal page it came from, checked November 18, 2026; Node4 figures are read from the current price list.
Which products line up
| Job | Node4 plan | IPRoyal product |
|---|---|---|
| Datacenter IPs you rent by the proxy | Datacenter | Datacenter proxies, more than 60 datacenter locations, sold as dedicated IPs |
| A list of static IPs several customers share | Shared Datacenter, up to five customers per IP | Not sold as a separate shared tier on its pricing page |
| Residential traffic by the gigabyte | Residential | Residential proxies, an advertised 195 or more countries |
| Static ISP-registered addresses | Not sold | ISP proxies, ISP proxies that belong only to you |
| Rotating datacenter traffic | Rotating Datacenter (per GB) and Rotating Unmetered (per connection) | Not compared here; IPRoyal's lineup above covers the products that match |
Side by side
| Dimension | Node4 | IPRoyal |
|---|---|---|
| Datacenter price | $32.25 a month for 25 proxies ($1.29 each) | $1.57 a proxy for 30 days, $1.48 for 60 days or $1.39 for 90 days |
| Datacenter bandwidth | No data cap on any datacenter plan size | 100 GB of traffic per proxy per monthly cycle, pooled across the order, then a speed reduction; unlimited bandwidth on datacenter proxies |
| Datacenter protocols | HTTP(S) and SOCKS5 | HTTP, HTTPS and SOCKS5 on datacenter proxies |
| Residential entry price | $4.99 a month | $7.35/GB for 1 GB pay as you go |
| Residential traffic expiry | Monthly allowance, no rollover | residential traffic that never expires |
| Residential commitment | Subscription billed monthly, quarterly or yearly (PayPal plans are monthly); the data allowance resets each month of the term, and there is no pay-as-you-go option | a zero monthly minimum and no long-term contracts; pay as you go or a subscription, with subscription term lengths not recorded in our October 5, 2026 check |
| Residential sticky sessions | Up to 30 minutes, best effort, on Node4's residential gateway | the same proxy kept for up to 7 days |
| Residential targeting | Country, state, city and ASN | country, state and city targeting |
| Residential sourcing | Partner network, resold | real IP addresses from regular households |
| Residential coverage | 160+ countries | an advertised 195 or more countries |
| Free start | 3 free shared proxies, 1 GB a month, no card required (HTTP(S) only) | No free plan stated on its pricing pages, checked October 5, 2026 |
| Static ISP addresses | Not sold | ISP proxies that belong only to you, from $1.80 a proxy for 24 hours, or $2.70 for 30 days, $2.55 for 60 and $2.40 for 90 |
Two matched-cost examples
About 25 datacenter proxies. Node4: $32.25 a month ($1.29 each), no data cap. IPRoyal: $1.57 a proxy for 30 days, $1.48 for 60 days or $1.39 for 90 days, and 100 GB of traffic per proxy per monthly cycle, pooled across the order, then a speed reduction while unlimited bandwidth on datacenter proxies on a different page, so confirm the actual cap before buying. Per proxy the two are close at 30 days. IPRoyal's price falls further on a 90-day term, and Node4 also sells a discounted quarterly term on eligible plans (card, Bitcoin or USDT; PayPal plans are monthly), so for a 90-day commitment compare the two quarterly totals at checkout rather than three Node4 monthly bills against one IPRoyal 90-day price. IPRoyal also publishes more than 60 datacenter locations, sold as dedicated IPs against Node4's three countries, so a non-US/Italy/Spain datacenter target decides this one on location alone.
Residential at 1 GB and 10 GB a month. At 1 GB, IPRoyal is $7.35/GB for 1 GB pay as you go against Node4's smallest plan at $4.99 a month for 3 GB, so a tiny test costs less on IPRoyal. At 10 GB, IPRoyal's pay-as-you-go rate is $5.51/GB for 10 GB pay as you go; Node4's 10 GB plan is $9.99 a month. Multiply IPRoyal's per-GB rate out to 10 GB and Node4 is the cheaper buy at that volume, and IPRoyal's traffic carries no expiry if a job runs in bursts rather than every month.
Where each provider falls short
IPRoyal does not fit a job that needs:
- a shared datacenter tier distinct from its per-proxy packages, since its pricing page lists one datacenter product rather than a separate shared tier;
- a stated free plan to test before paying;
- a single page that resolves whether datacenter bandwidth is capped at 100 GB per proxy or unlimited: 100 GB of traffic per proxy per monthly cycle, pooled across the order, then a speed reduction on the product page, unlimited bandwidth on datacenter proxies on the general pricing page.
Node4 does not fit a job that needs:
- a datacenter exit outside the United States, Italy or Spain, where IPRoyal's more than 60 datacenter locations, sold as dedicated IPs covers more ground;
- a residential session held for hours or days rather than a best-effort 30-minute ceiling, where IPRoyal offers the same proxy kept for up to 7 days;
- static ISP-registered addresses, which IPRoyal sells and Node4 does not;
- a residential purchase smaller than 3 GB.
What this comparison did not measure
Both sides above are published terms, not a block-rate or speed test. Neither provider publishes one for your target, and this page does not invent one. If you already run IPRoyal, record your current results first, usable responses per request, broken down by target and error, then run the same requests through Node4 with identical headers, timeouts, concurrency and retry policy:
curl -q --noproxy '' --connect-timeout 10 --max-time 30 \
--proxy "$PROXY_URL" \
--write-out 'connect=%{http_connect} status=%{http_code}\n' \
--output /dev/null \
"$TARGET_URL"%{http_connect} reports whether the proxy accepted the tunnel; %{http_code} is the destination's own response. A 200 from the destination is not proof of a usable record: check the response body against the fields your job actually needs before counting it as a pass. Node4's free shared proxies run over HTTP(S) only and cannot reach the rotating or residential gateways, so test those on the smallest paid plan.
Recommendation
Use IPRoyal for datacenter countries beyond the United States, Italy and Spain, for a residential session that needs to outlast 30 minutes, for static ISP addresses, or for a residential test under 3 GB. Use Node4 for datacenter proxies in its three supported countries at a lower per-proxy rate, or for residential traffic once a job passes about 10 GB a month. Size datacenter on the datacenter price list and residential on the residential price list. For other providers that fill the gaps above, see IPRoyal alternatives.